Blog

CYC Photon Pro vs. Photon Gen2: which one suits your bike

CYC Photon Pro mid-drive motor fitted to a mountain bike

Photon Pro vs. Gen2: the difference in one sentence

The CYC Photon Pro has more power than the Photon Gen2, weighs 1 kg more and costs 170 euros more. They fit the same bottom brackets and take the same chainrings. What matters is whether you need the extra power of the Pro.

The numbers side by side

All technical values come from CYC. Prices are for the motor with a 68 to 83 mm bottom bracket in our shop, including VAT.

  Photon Pro Photon Gen2
Rated power 3000 W 750 W
Peak power 4000 W 2000 W
Torque 180 Nm 135 Nm
Weight 4.5 kg 3.5 kg
Price 1,120 euros 950 euros

What both have in common

On both, the controller sits inside the motor. CYC lists both under the VTON Gen 2 platform. They run on 36-72V batteries and measure your pedal force with a torque sensor. Display options are the SW102T or the Intuition with a colour screen. Settings are made in the Ride Control app via Bluetooth.

On both, motor, controller and gear reduction sit in one unit. Added to that are ISIS cranks in 160 or 170 mm and the module with torque sensor and freewheel.

Installation is the same too. CYC offers both motors for BSA 68 to 83 mm, BB92, BSA 100 mm and BSA 120 mm. Chainrings range from 32T to 50T. The small 32T and 34T rings sit further outboard than the larger ones. Keep that in mind for your chainline.

If a bike fits the Gen2, it fits the Pro.

CYC shows the installation step by step on the Gen2. It works the same way on the Pro:

What the Pro is built for

CYC Photon Pro at the bottom bracket of a mountain bike, with battery, crank and chain
The Photon Pro on a full suspension bike, battery on the down tube

CYC names steep trails and heavy loads. That is also where we recommend it: a cargo bike with a lot of payload, a trailer on hills, long climbs with luggage. In those cases 180 Nm makes a difference over 135 Nm.

For a trekking bike, commuting or a regular MTB the Gen2 is enough. The extra cost and weight get you nothing there.

What the Pro cannot do

You only get 3000 W from a battery that delivers enough current. On paper the Pro needs almost 58 A at 52 V for that. According to CYC the A52 delivers 50 A continuous, which works out to roughly 2600 W at 52 V. We do not stock a 72 V battery.

You will feel the extra kilo when carrying the bike and off road, especially on a light frame.

The Pro has been on the market since 2026, so there is no long-term data yet. On the Gen2, CYC made the sprag clutch larger than on the Gen1, from 12 x 20 mm to 20 x 28 mm.

Which battery for which motor

We offer three CYC batteries for both motors:

  • A52 with 52 V and 520 Wh for 700 euros
  • A52L with 52 V and 780 Wh for 900 euros
  • A65 with 64.8 V and 1296 Wh for 1,350 euros

Any of them works with the Gen2. CYC specifies 30 A continuous and 40 A peak for it.

We also stock the bottle cage batteries from EM3ev. The Super Shark with 730 Wh and the Jumbo Shark with 900 Wh deliver up to 40 A. Both come with a Bluetooth BMS with temperature monitoring and charge at up to 8 A.

With the Pro, current is what matters. If you want to use its power, look at the A65 first. The higher voltage needs less current for the same power.

The A65 is 473 mm long and 144 mm high. Measure your down tube to see if it fits.

Will it fit your bike

Before you order, check:

  • the width of your bottom bracket, measured on the frame
  • free space on the down tube for the battery
  • the chainline, especially with a small chainring

If you are unsure, send us a photo of your bottom bracket area.

Our view

For most conversions we recommend the Gen2. It is lighter and cheaper. It has enough power for trekking, commuting and trail riding. We go for the Pro when a cargo bike carries heavy loads, when a trailer is involved or when you ride long steep climbs with weight. In that case the A65 is worth a look as well.

Legal notice: The Photon Pro and the Photon Gen2 have a rated continuous power above 250 W. Under StVZO (Germany) and StVO (Austria) they do not count as pedelec drives. The finished vehicle needs registration, an insurance plate and a driving licence on public roads. A power limit you can change in the settings does not change that. We sell both motors for use away from public roads. Check the rules in your country yourself.

Status: September 2026.

Leave a Reply

Your email address will not be published. Required fields are marked *

[sibwp_form id=3]