Powerful e-bike retrofit motor: up to 5000W, 250 Nm, 36-72V batteries, smartphone app and much more! 1.250,00 € incl. VAT, plus shipping Payment methods:
5000W e-bike mid-motor CYC X1 Pro Gen4
Kompatibel mit 36V battery, 48V battery, 52V battery Typ / Verwendung E-bike retrofit mid-motor Brand CYC MOTOR
E-bike retrofit motor CYC X1 PRO EXTREME!
Discover the ultimate in e-bike power with the new 4th generation CYC X1 PRO. This powerful motor with an impressive 5000W output was specially developed for very demanding bikers. Experience the freedom of riding off the beaten track through the terrain.

Features:
- 5000W power
- 280 Nm max. torque
- New X12 controller
- Compatible with 36-72V batteries
- 32T, 38T and 40T chainring options
- Fits bottom bracket widths from 68-120mm
The biggest innovation compared to the previous Gen3 version is the new and powerful X12 controller. The following improvements have also been made:
- Robust Gen4 torque sensor
- New rotor for higher speed
- 25% longer motor for increased efficiency and better heat dissipation
- Simplified chain tensioner
In this blog, we have taken a closer look at the upgrades.

The CYC X1 Pro Gen4 motor is available for the following bottom brackets (select above):
- BSA 68-83 mm
- BB92 mm (incl. adapter)
- BSA 100 mm
- BSA 120 mm
Included in addition to the motor:
- X12 Controller
- Fastening set
- Axle sleeve and axle
- Speed sensor
- Main wiring harness
- Spacer
The X12 controller is connected to the smartphone via Bluetooth. After installing the new CYC Motor App, you can adjust the motor parameters conveniently and without cables. The download area contains numerous useful links and downloads (installation, operating instructions, printouts, etc.).
Controller:
The new X12 controller is much more powerful than the X6 controller. It also allows the use of 20S batteries (72V nominal voltage). We have compared the two controllers in the following table:
| X6 Controller | X12 Controller | |
|---|---|---|
| Nominale Spannung | 36-52V | 36-72V |
| Peak Phase Current | 110A | 180A |
| Peak Battery Current | 65A | 100A |
| IP Schutzklasse | IP66 | IP66 |
| Display Kompatibiliät | SW102, DS103 | SW102 (bis 52V), DS103 |
| CYC Kompatibilität | X1 Pro Gen2 & 3, X1 Stealth Gen1 & 3 | X1 Pro Gen4 |

Smartphone App:
With the new X-Controllers, you can unleash the full potential of the CYC motor: instant torque and power, stable off-road performance, responsive throttle response and refined pedal assistance. With the CYC Ride Control smartphone app (available in the App and Playstore), you have all the options at your fingertips. Simply pair your smartphone with the controller via Bluetooth and you have the freedom to ride the way you want.
A 72V (20S) battery should be used in order to utilize the maximum power. It is essential to ensure that the battery is sufficiently designed. The CYC X1 Pro Gen4 can also be operated with the 14S batteries available from us and thus with 58.8V – the maximum output here is approx. 2000W. We recommend that you use batteries with a high discharge current rate for the individual cells (e.g. Samsung 30Q or Sony VTC) so that the required amperes can be drawn from the battery. You are welcome to contact us – we can also manufacture a battery according to your specifications (up to 52V/14S). If you need a 20S/72V battery, simply contact a battery manufacturer directly.
Who is CYC?
The company CYC MOTOR LTD was founded in 2018 and is based in Hong Kong. The company now employs around 40 people. They have set themselves the task of developing the best e-bike motor system. They now have 3 motors on offer: X1 Pro, X1 Stealth and Photon.
What is the difference to Bafang BBS motors?
The main difference: Bafang BBS motors have cadence control (support based on crank movement or frequency) while CYC motors support via torque control. Here, the motor assistance is based on the force exerted on the pedal - which corresponds to a natural riding experience. This makes starting off on steep terrain, for example, very easy, whereas with the Bafang BBS motor you have to make 1/4 of the crank rotation at the start without motor assistance.
With the PHOTON motor, they have developed a strong competitor to the tried and tested Bafang BBS motors - in addition to the excellent torque support, it impresses with its attractive appearance, small design and simple installation.
Here you can find our Blog post with a clear comparison of the motors.
Do I have to use a switch sensor with the CYC motor?
You can, but you don't have to. Unlike Bafang BBS motors, it is not necessary to use the shift sensor with CYC motors.
The reason: Since these motors have torque control, load-free shifting without pedal pressure is possible without any problems. Cadence-controlled motors (such as Bafang BBS) would also provide support here and pull on the chain. The CYC motor, on the other hand, assists due to the pedal pressure and therefore enables load-free shifting without motor assistance.
Which batteries can be used to operate the CYC motor?
The CYC Gen3 motors (Generation 3, x6 controller) as well as the CYC Photon motor can be used with 36V (10S), 48V (13S) and 52V (14S) batteries. Both the displays offered and the X6 controller included are compatible.
Depending on the desired output, it must be ensured that the battery can provide the required current (amperes) (up to max. 65A). When using our batteries, an output of approx. 2,000W is possible.
The CYC X1 Pro Gen4 (4th generation) is supplied with the X12 controller and is also compatible with 72V (20S) batteries.
What does the “Gen” designation mean?
CYC Motor has continuously developed the engines and added the suffix "Gen" for "Generation" (version) to differentiate them. The first version of the motor (X1 Pro Gen1) was launched on the market in 2019. This only had cadence control (no torque support yet) and was available in a gray look. In 2020, the further developed Gen2 version was released. This engine was equipped with torque control and was already available in black. In 2021, a new motor was launched alongside the X1 Pro: X1 Stealth (Gen1). This engine is even more compact than the X1 Pro and has slightly less power. At the end of 2022, both engines were released in the Gen3 version: X1 Pro Gen3 and X1 Stealth Gen3. There was never a Gen2 version of the X1 Stealth. Gen3 looks the same as Gen2, the improvements are: Torque sensor by chainring and no longer in the axle, new x6 controller, etc. The new Gen4 version of the X1 Pro motor was released in January 2024. According to the manufacturer, no new generation is currently planned for the X1 Stealth Gen3.
To summarize:
- 2019: X1 Pro Gen1 (gray, cadence control)
- 2020: X1 Pro Gen2 (now black and torque control)
- 2021: X1 Stealth Gen1
- 2022: X1 Pro Gen3 and X1 Stealth Gen3
- 2024: X1 Pro Gen4 (with X12 controller)
Can the CYC motor be retrofitted to a different bottom bracket width?
As the CYC motors contain a modular system, it is very easy to adapt the set to a different bottom bracket width at a later date. All you need to do is replace the relevant parts. Just send us an e-mail to welcome@fasterbikes.eu if you have any further questions.
Can other chainrings be used with the CYC motor?
All conventional chainrings with 104 BCD (Bold Circle Diameter) and 4-hole can be fitted to the X1 Pro and X1 Stealth motors. With these motors, the chainring consists of several parts (from the outside to the inside):
- Cover
- Drive chainring (leads to the motor)
- Bicycle chainring
All these components are attached to a 4-arm 104 BCD spider. It is therefore also possible to use other chainrings that are compatible with this spider.
Only the chainrings provided by the manufacturer can currently be used with the Photon motor (as of 2025). However, Lekkie is already working on suitable chainrings for the Photon motor.
Can the bicycle coaster brake still be used?
As with the Bafang BBS motors, this is no longer possible due to the freewheel. This freewheel enables the chainring to be driven without moving the cranks - which is very important when using the throttle, for example.
How can the CYC motor be adjusted / programmed?
The Gen3 CYC motors (X1 Pro, X1 Stealth and Photon) can be conveniently programmed via the smartphone app. We have already published several videos on YouTube. There are also instructions for programmable values. Essentially, the following parameters can be changed:
- Response behavior when pedaling
- Throttle response
- All settings for 2 modes (Street and Race)
Does the CYC motor also work without brake sensors?
The CYC X1 Pro, X1 Stealth and Photon motors also work without brake sensors. These are optional and ensure faster interruption of the motor power. The way they work is simple: as soon as the brake handles are actuated, the contact is interrupted and the drive is stopped immediately.
Can the CYC motor also be used without a battery?
Yes, this is possible without any problems.
Can 2 driving profiles be set?
Yes, the CYC motors have 2 driving profiles (Street and Race mode) on the X-Controllers. The engine settings can be stored differently in the driving profiles - one for street mode, the second for off-road. These profiles can then be called up and changed on the display.
CYC Photon PRO
CYC Photon Gen2
CYC X1 Pro Gen4
Bafang BBSHD
E-Bike motors BESTSELLER
Reviews
There are no reviews yet.