Bafang BBS colour display EggRider C1 with remote

The 2-inch colour display from EggRider with a handlebar remote: 2 riding profiles (road and off-road) | motor settings and statistics via smartphone app | This version fits the Bafang mid-drives BBS01, BBS02 and BBSHD (UART).

SKU: 1708

181,50 € incl. VAT, plus shipping

All prices include EU import duties and sales tax — no additional payment required upon delivery (applies to deliveries within the EU)
Shipped from the EU warehouse
Advice and warranty service through your dealer in Austria
Verfügbar – Lieferzeit: 3-7 Werktage

In stock (can be backordered)


Payment methods:

Colour display with handlebar remote, two riding profiles and smartphone app

The EggRider C1 is EggRider’s new colour display and the big alternative to the compact EggRider V2. Instead of the small black-and-white screen, the C1 has a 2-inch colour display with an animated dashboard: speed, battery level, power, assist level and range stay readable even in bright sunlight. The display is operated with a separate handlebar remote, so your hands stay on the grips. Via Bluetooth the C1 connects to the EggRider app, which lets you adjust the motor parameters of your Bafang mid-drive without a programming cable.

Two riding profiles (road and off-road) can be switched at the press of a button. The app stores separate settings for each profile, for example maximum speed, power and assist levels.

  • 2-inch colour LCD with a dynamic arc and bar graphs, brightness adjustable in the app
  • Remote with Up / Mode / Down buttons and walk assist, switch between road and off-road
  • One-click menu: step through range, power, current, battery voltage and consumption (Wh/km) with a single button
  • Connects to the green 5-pin round Higo plug (Bafang UART)
  • Voltage range 20 V to 60 V, suitable for 36 V, 48 V and 52 V batteries
  • Bluetooth Low Energy for the EggRider app (Android 5.0 and later, iOS)
  • In the app: ride statistics, range estimate, battery cycles, motor parameters, bike lock function
  • Dust- and water-resistant to IP65 – display and remote
  • Display housing 47.4 × 64.2 × 29.2 mm, 100 g including both mounts; remote 17 × 43.7 × 44.2 mm, 20 g
  • Mounts for 31.8 mm and 22.2 mm handlebars, cable length 50 cm

The C1 accepts a maximum battery voltage of 60 V – that means batteries up to 52 V nominal (14S). It is not suitable for 72 V systems.

EggRider offers the C1 for several motor systems. The version sold here is the Bafang UART edition for the BBS01, BBS02 and BBSHD mid-drives. It does not fit CYC motors or Bafang CAN-bus motors (M500, M600 and relatives). If you need the CAN-bus edition or a version for a different system, send us a message – we will sort it out with EggRider.

Compatible with the following Bafang mid-drives (UART):

  • Bafang BBS01 250 W / 350 W / 500 W / 750 W
  • Bafang BBS02 250 W / 350 W / 500 W / 750 W
  • Bafang BBS03 / BBSHD 750 W / 1000 W / 1500 W

Installation: display and remote are fixed to the handlebar with the supplied mounts, and the display cable plugs into the green Higo connector of the Bafang wiring harness. Tighten the mount screws by hand only – too much force can crack the mount. Firmware updates are installed through the EggRider app.

More information from the manufacturer:

Legal notice: The EggRider app can change motor parameters such as the speed cut-off. On public roads a pedelec may only be ridden with a maximum of 250 W rated continuous power and assistance up to 25 km/h. Other settings are permitted on private ground only. Check the rules in your country before making changes.

Views: 15

Important Note:
Making any changes to the manufacturer's original connectors will void the warranty.

Customer ratings

Reviews

There are no reviews yet.

Be the first to review “Bafang BBS colour display EggRider C1 with remote”

Your email address will not be published. Required fields are marked *

[sibwp_form id=3]