Will an e-bike conversion kit fit your bike? Bottom bracket and brake disc explained

Usually, yes. For a mid-drive e-bike conversion kit, the bottom bracket decides whether it fits. For the Skarper, it’s the rear brake disc. Both take a few minutes to check. Not sure? Look up your model in our list.

Mid-drive e-bike conversion kits: it comes down to the bottom bracket

A mid-drive motor sits in your frame’s bottom bracket shell, so the shell has to match the motor. According to CYC, the Photon Gen2, Photon Pro and X1 Pro Gen4 fit BSA 68 to 83 mm, BB92, 100 mm and 120 mm. The Bafang BBSHD fits BSA 68 to 73 mm. There are separate versions for 100 and 120 mm.

You’ll find the width in your bike’s spec sheet.

Bottom bracket unit for the CYC Photon with lockring and spacers
  • CYC Photon Gen2: BSA 68 to 83, BB92, 100 and 120 mm
  • CYC Photon Pro: BSA 68 to 83, BB92, 100 and 120 mm
  • CYC X1 Pro Gen4: BSA 68 to 83, BB92, 100 and 120 mm
  • Bafang BBSHD: BSA 68 to 73 mm, with separate versions for 100 and 120 mm

Lots of mountain bikes use a BB92 bottom bracket (press-fit, 92 mm wide). For the CYC motors, choose the BB92 version. Fat bikes with a 100 or 120 mm shell take the matching wide version.

A conversion always means new cranks and a new chainring. You won’t need your old ones.

Where does the battery go?

On a mid-drive, the battery bolts onto the bottle cage mounts on the down tube. Every bike has them. On the Skarper, the 240 Wh battery is built into the unit. To charge it, you take the whole Skarper indoors. Your frame doesn’t need a separate place for a battery.

Skarper: it comes down to the brake disc

With the Skarper, your bottom bracket stays as it is. The unit drives the rear wheel through the DiskDrive brake disc. Your bike needs a rear disc brake with a rotor of up to 160 mm. If your rotor is smaller, an adapter at the caliper sorts that out.

If your frame is built for a 180 mm rear rotor as standard, or your bike has a Rohloff hub, choose a mid-drive.

How to find out what fits your bike

Start with our list. It covers more than 300 bike models and the drive that suits each one. Can’t find yours? Send a photo of the bottom bracket and the rear wheel to welcome@fasterbikes.eu or via WhatsApp. We’ll tell you which kit fits.

FAQ

Will a mid-drive fit a carbon frame?

Yes, as long as the bottom bracket matches. For BB92, choose the BB92 version of the CYC motor.

Can I do the conversion myself?

Yes. You’ll find instructions and fitting videos on our downloads page. If you get stuck, we’ll help you out.

Which kit suits the way I ride?

Have a look at our drive comparison. It shows what each motor is built for.

[sibwp_form id=3]