Downloads and information
We have summarized the most important downloads on this page.
Configuration / programming of the Bafang BBS01, BBS02 and BBSHD motors
Various values can be changed with regard to response behavior, power, assistance, etc. Basically, these values can be edited as follows for the Bafang BBS motors:
- Option 1 – Use Eggrider display: this allows these values to be conveniently adjusted via smartphone
- Option 2 – Use programming cable and laptop: Each individual programming cable is tested by us for functionality. We use a Windows 10 + 11 operating system for this.
If the correct driver is not installed automatically, simply try one of these:
Downloads for our e-bike motors
CYC motors
X1 Pro, X1 Stealth, Photon
Bafang motors
BBS01, BBS02, BBSHD
Downloads for our e-bike batteries
Our batteries have a Bluetooth BMS. This allows you to check the battery values (charge status, cell status, etc.) on your smartphone. You can find the corresponding apps here:
Super Shark battery (4P)


Jumbo Shark battery (5P)



Meaning of the LEDs

Information about chainrings and Lekkie downloads
Which chainring should I choose? Which chainring suits my bike – what gives me a good chainline (chain as parallel to the frame as possible)? We have created the following video to answer these questions.
Application:
The top view of the motor can be seen on both templates. The motor axle has a diameter of approx. 33 mm (see dimensions). With “START” the chainring is mounted on the motor. The colored lines represent the center of the teeth of the respective chainring, whereby the line length corresponds to the chainring diameter. We recommend the following procedure: Remove the bottom bracket (not absolutely necessary, but recommended), print an A4 template to scale (1:1) and cut it out, then place the “motor axis of the template” in the bottom bracket. This allows you to see the offset of the selectable chainrings and whether the gearbox housing or the chainring touches the swingarm. If the gearbox housing of the motor touches the swingarm (black arrow), the use of bottom bracket spacers(2 mm or 5 mm) is recommended. If the chainring touches the swingarm, you should use chainring spacers(BBS01/02 or BBSHD). If in doubt, it is advisable to simply order spacers at the same time.
CYC Photon PRO
CYC Photon Gen2
CYC X1 Pro Gen4
Bafang BBSHD
E-Bike motors BESTSELLER


