The Lekkie AntiJam fits the Bafang BBS01 and BBS02, including the B versions. It is designed for the 40 tooth Lekkie Bling Ring and also helps with the 42T. Other Bling Ring sizes and steel chainrings run as usual with it fitted. This version does not fit the Bafang BBSHD.
Because of its offset the Bling Ring sits closer to the motor than the stock chainring. If the chain drops, it can jam there between chainring and motor and break parts. The AntiJam holds it back. It also pushes out stones before they get wedged under the 40T Bling Ring. According to Lekkie this is the most common reason a 40T Bling Ring fails early.
Included:
- AntiJam, two parts
- 2 plastic screws M3 with Phillips head
- 1 countersunk screw M4
The material is PETG. It is 3D printed. Small print marks on the surface are normal.
To fit it, take off the drive side crank and the chainring. Join the two halves with the M3 screws. The supplied M4 countersunk screw then replaces the top mounting screw of the controller. The AntiJam has to sit firmly against motor and controller. After refitting the chainring, check the clearances before you ride.
Tools: 2.5 mm and 3 mm hex key, PH2 Phillips screwdriver.
CYC Photon PRO
CYC Photon Gen2
CYC X1 Pro Gen4
Bafang BBSHD
E-Bike motors BESTSELLER
Reviews
There are no reviews yet.